So now that the summer is here for the week we’re sure to see some beautiful sunny days for all to enjoy. So plan your glamping Wales trips, or somewhere equally as appealing when the summer sun is shining, and give our simple guide to making a fun and tasty watermelon keg a go, why don’t you?
- 1 medium-large watermelon (seeded or seedless)
- Kitchen knife
- Cutting board
- Green dry erase marker or ¾”-1” thick painter’s trim tape
- Channel knife (can use top of a vegetable peeler as alternative)
- Large bowl & spoon or scoop
- Apple corer
- Spigot (from beer making supply company)
- Twine & straight pins
- Watermelon juice or punch recipe
- Wash the watermelon under cool running water and pat dry.
- On a cutting board, place the watermelon on its side and cut off 1/4”-1/2” from both ends, being careful not to cut too deep into the white part of the rind. One side will provide a sturdy base.
- Use dry erase marker or painters tape to make a thick band on the upper 1/3 and lower third of the watermelon that will represent the metal bands around a barrel or keg and use the channel knife to trim away a thin line to represent those metal bands.
- Hollow out the watermelon with a spoon or scoop, reserving the watermelon pieces to make your favourite punch or juice. Be sure to leave about 2” of watermelon flesh towards the bottom of the watermelon so the spigot can be placed.
- Use an apple corer to cut a circle for your spigot to fit through the watermelon rind, placing it about 2-3 inches above the bottom of the watermelon. Screw your spigot into place.
- For added detail, carefully pin twine in your lines you’ve made to represent the metal bands around the barrel/keg. Be careful that the pins do not poke through into the barrel/keg.
- Place the barrel/keg on a saucer or plate and fill with your favourite chilled punch or juice recipe.
- Relax and enjoy!
You can also watch a simple video on how to make a watermelon keg, here: